I
NSTALLATION
6.5.3
Aligning the Lattice Supports
32 / 146
6
1
Lattice support 1x
2
Nut, M24
3
Washer, 24
4
Anchor bolts
5
Foundation
6
Lifting tackle
• Using a water level or hydrostatic level, align the lattice supports
(1) with one another at the same height and in the longitudinal
and transverse directions by adjusting the nuts (2) on the anchor
bolts (4). Use the upper surfaces of the lattice supports (mounting
surfaces for pole column) as the reference surface. Tighten the
nuts to a torque of 250 Nm and lock them.
OI 250 (EN)
1
12x
8x
Provided at site by customer (corrosion-
resistant steel with minimum strength of
Rp 235N/mm²)
Provided at site by customer
-
2
3
4
5
REV7
/REV7