Exchange Of Flexlink Gas Connections - GE GL 311 F3/4031 P/VE Operating Instructions Manual

S E
PECIAL QUIPMENT
12.2.4

Exchange of FlexLink Gas Connections

112 / 146
(O )
PTIONAL
The flexible metal hose is fitted for sealing purposes with a sealing
set consisting of a plastic bushing (1.1) flanked by two O-rings
(1.2). For the sealing set to fit properly on the end of the flexible
metal hose (1), two corrugation valleys (2) must remain uncovered.
Two locking plates (3) offset radially from one another prevent the
sealing set from sliding when inserted into the sealing area of the
coupling (4). A secure fit of the flexible metal hose (1) is ensured by
screwing on the locking plates (3).
1
5
4
Flexible metal hose
1
Plastic bushing
1.1
O-ring
1.2
Corrugation valley
2
Locking plate
3
Coupling (filling connection)
4
Screw
5
OI 250 (EN)
3
1.2
1.1
1.2
2
2
1x
1x
2x
-
2x
1x
2x
REV7
/REV0