Disassembling The Crankcase - GE GL 311 F3/4031 P/VE Operating Instructions Manual

R
ECONDITIONING
10.2.2

Disassembling the Crankcase

37 Crankcase
38 Insulating tube
39 Connecting piece, bottom
40 Inner lever
41 Spring seat
42 splint pin 12KK2000 964
43 Shaft
44 Bearing cap
45 Bearing insert
46 Bearing sleeve
47 Filter cover
48 Filter sleeve
50 Pin, 12x47.5
51 Pin, 10x75
100 / 146
• Remove the four screws (64) and the bearing cap (44).
• Remove the bearing insert (45) and the outer part of the
cylindrical roller bearing.
• Remove the shaft (43) and inner ring from the cylindrical roller
bearing.
• Remove the insulating tube (38) along with the inner lever (40)
and spring seat (41) from the crankcase.
** Sliding and bearing surfaces lubricated per L7
1x
1x
1x
1x
1x
2x
1x
1x
1x
1x
1x
1x
1x
1x
OI 250 (EN)
52 Roller bearing
53 Roller bearing
54 Axial needle roller assembly 1x
55 Axial ring
56 Bearing ring
57 Sealing ring
58 O-ring 34.52x3.53
59 O-ring, 62.87x5.33
60 O-ring 38.82x5.33
62 Hexagon screw, 6x20 A2-70 4x
63 Washer, 6 A2
64 Hexagon screw, 6x25 A2-70 4x
65 Filter bag
1x
1x
1x
1x
1x
1x
2x
2x
8x
1x
REV7
/REV7