Set Up Geofencing - NETGEAR VMS4130-100EUS User Manual

7. Under Alert, tap or click Push Notification to turn alerts on and off for your
mobile device.
8. For email notifications, make sure that the Email Alerts check box is selected.
9. To specify an email address, tap or click Edit next to Email Alerts and enter the
email address.

Set Up Geofencing

Geofencing is a virtual fence that helps you discover when something or someone
enters or exits a predefined zone. You can use Arlo geofencing to arm, disarm, or
resume schedule modes, when your mobile device is in zone or out of zone.
To set up geofencing, you must use your mobile device and you must allow the Arlo
app to use your location.
Configure Your Mobile Device
¾ To configure your mobile device for more accurate geofencing:
1. Enable GPS or location services so that Arlo can locate your device.
2. Enable WiFi.
Set Up Geofencing for the First Time and Set Up Modes
¾ To set up geofencing for the first time and set up modes:
1. Tap the Arlo icon
The Devices page displays.
2. Tap Mode.
A list of cameras displays.
3. Tap or click the camera.
A list of available modes displays.
4. Tap Geofencing.
The Arlo Would Like to Use your Location prompt displays.
5. Tap Allow.
Geofencing works only if Arlo can locate your mobile device. The Location
Address page displays your current address.
Modes, Rules, and Smart Alerts
on your mobile device.
49