Set Up Geofencing - NETGEAR Arlo Q User Manual

5. Under If the following, specify the motion detection and audio detection
settings.
6. Under Then do the following, specify the settings for Arlo Q to respond to
motion or sound detection by recording video or taking a snapshot.
The selections are Record video, Take snapshot, or Do nothing.
7. Under Alert, click or tap Push Notification to turn alerts on and off for your
mobile device.
8. For email notifications, make sure that the Email Alerts check box is selected.
9. To specify an email address, click or tap Edit next to Email Alerts and enter the
email address.

Set Up Geofencing

You can use geofencing to arm, disarm or resume a schedule mode when you arrive
at or leave a given location. To set up geofencing, you must use your mobile device
and you must allow the Arlo app to use your location.
¾ To set up geofencing:
1. Tap the Arlo icon
The Cameras page displays.
2. Tap Mode.
A list of cameras displays.
3. Click or tap the camera.
A list of available modes displays.
4. Tap Geofencing.
A message displays stating that Arlo would like to use your location. To
implement geofencing, Arlo must use your location.
5. Tap OK.
The Location Address page displays.
6. Enter the address for your location.
The Location Name page displays.
Modes, Rules, and Smart Alerts
on your mobile device.
37