Insert The Battery Into Your Arlo Go Camera; Set Up Your Arlo Go Camera - NETGEAR Arlo Go Quick Start Manual

Insert the Battery
Into Your Arlo Go Camera
If power is available, you can plug your camera in and use it in powered
mode. We recommend that you insert the battery into your Arlo Go
camera even if you plan to power the camera using the power adapter.
¾ To insert the battery:
1. Unlock the battery compartment by pressing
and holding the latch.
2. Gently pull the battery door back to open the
compartment.
3. Align the battery contacts.
4. Insert the battery.
5. Close the battery door.
6

Set Up Your Arlo Go Camera

Use the Arlo app and your Arlo account to set up your Arlo Go camera. If
you already set up an Arlo account, you can add the Arlo Go camera to
your account.
During setup, your Arlo Go camera must be connected to the AT&T
network.
Note: This requires that you are using a compatible device and a mobile
service plan. Additional restrictions and data charges might apply.
Coverage and service are not available everywhere.
After you add your Arlo Go camera to your Arlo account, you can place
the Arlo Go camera anywhere in AT&T's network coverage area.
For information about optimizing mobile connectivity, scan this QR code
or visit http://tinyurl.com/jyoysqo.
7