Page 1
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Netgear Arlo Pro VMS4130-100EUS o cerca il tuo prodotto tra le migliori offerte di Videosorveglianza Arlo Pro HD Security Camera System User Manual Arlo Technologies, Inc. November 2018 2200 Faraday Ave.
Contents Set Up Your System Insert the Battery Into Your Camera ......................7 Get the Arlo App ....................................8 Connect Your Base Station to the Internet ..................8 Arlo Pro Base Station LEDs ..............................9 Arlo Pro Camera LED ..................................10 Add an Arlo Pro Camera to an Existing Arlo Account .............12 Sync Your Cameras With the Base Station ..................12 Arlo Pro Firmware Updates ............................13 Place or Mount Your Cameras ..........................13...
Page 4
USB Device Storage With Arlo Pro Connect a USB Storage Device ..........................30 View the USB Storage Device Status ......................31 Safely Eject and Remove a USB Storage Device ..............31 View Video Clips on a USB Storage Device ..................33 Change the USB Storage Device Overwrite Setting ............33 Format a USB Storage Device ..........................34 Turn on Recording for a USB Storage Device ................35 Stop Recording Onto a USB Storage Device ..................36...
Page 5
Settings Turn the Arlo App Fingerprint ID Login On and Off .............59 Change the Time Zone ................................59 Camera Settings ....................................60 Audio Settings ......................................62 Base Station Settings ................................64 View Device Information ..............................68 Restart the Camera..................................68 Remove a Camera From Your Account ......................69 Manage Your Subscription Plan Subscription Plans ..................................70 Upgrade to a Paid Subscription Plan ......................70...
Page 6
Signal Strength ....................................84 Reset the Arlo Base Station to Factory Settings ..............85 11. Rechargeable Battery Safety Safety Rules for Arlo Pro Rechargeable Batteries ............86 Safety Rules for Arlo Pro Charging Station ..................87...
1. Set Up Your System Setting up your Arlo Pro system involves these steps: • Insert the battery into your camera. • Get the Arlo app. • Connect your base station. • Get an account. • Sync your cameras to the base station. •...
Set Up Your System Get the Arlo App For the best experience, download the Arlo app for your smartphone by scanning this QR code or searching for Arlo in the app store. https://my.arlo.com/#/login Note: If you already use the Arlo app, make sure that you are using the latest version. To find out if an update is available, go to the app store and search for Arlo.
Set Up Your System 3. Turn the base station on by pressing the On/Off button. The Power LED and Internet LED on the front of the base station light green in about two minutes. Your base station is set up. Arlo Pro Base Station LEDs See the following list for explanations for green, amber, and blinking LEDs: Power...
Set Up Your System Arlo Pro Camera LED The LED on the camera lights when the camera is powered on. The LED changes color and blinks depending on the battery charge and to indicate the status of activities such as syncing the camera and updating the camera firmware. See the following table for explanations for the Camera LED.
Page 11
Set Up Your System Get an Account ¾ To set up an Arlo account: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. If you are using a mobile device that supports Touch ID , you are prompted to ®...
Set Up Your System Add an Arlo Pro Camera to an Existing Arlo Account ¾ To add an Arlo Pro camera to an existing Arlo account: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar of a browser.
Set Up Your System The LED on the camera LED lights blue and blinks rapidly to confirm syncing. The camera is ready for viewing. The LED lights amber and blinks rapidly for 10 seconds if the sync is not successful. You must repeat the sync process. 5.
Set Up Your System ¾ To mount your camera to the wall: 1. Fasten the mounting screw into the wall, and hang the magnetic mount from the screw. 2. If you’re mounting the camera to drywall, be sure to use the plastic drywall anchors that are provided.
Set Up Your System Position Your Camera to Optimize Its Field of View Your Arlo Pro camera has a 115-degree field of view. The green areas in the following illustrations show the camera’s field of view. horizontally and vertically When positioning your Arlo Pro 2 camera, keep these tips in mind: •...
Set Up Your System • Make sure that side-to-side traffic crosses Arlo’s field of view. Arlo’s motion sensor is much more sensitive to side-to-side movement across its field of view than to movement directly toward or away from the camera. The best area for motion detection is 5 feet to 20 feet (1.5 to 6 meters) from the camera position.
Set Up Your System Note: In Position mode, the camera streams video as fast as possible, without buffering, so that you can aim the camera while watching on a smartphone and make near real-time adjustments to the camera position. This means that you might see lower-quality video while the camera is in Position mode.
Set Up Your System Add a Camera From Another Arlo Account ¾ To add a camera from another Arlo account: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar of a browser.
2. View Your Content Videos recorded by your camera are stored in a library. You can view your recordings and snapshots, mark them as favorites, and search using the filter. View the Devices Page When you launch the Arlo app, the Devices page displays. Camera name Camera icons Camera feed...
View Your Content View Camera Feeds You can view your camera feeds at any time. ¾ To view camera feeds: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser.
View Your Content Record Clips From Live Video ¾ To record clips from live video: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar of a browser. The Devices page displays. 2.
View Your Content Talk and Listen ¾ To talk and listen: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar of a browser. The Devices page displays. 2. Tap or click Live in the camera feed image. The camera feed icons display at the bottom of the camera feed image.
Page 23
View Your Content 3. Under System, tap or click Device Order. A list of devices displays in the order that they display on the Devices page. 4. If you are using a smartphone or tablet, tap Edit at the top of the page. A list icon displays.
View Your Content Invert a Camera Feed You can invert the video feed image. ¾ To invert the video display: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar of a browser.
View Your Content View Recordings and Snapshots Your Arlo Pro camera stores recordings and snapshots in the library. You can use the filter and the calender to find and view specific recordings. Use the Library You can use the library to find and view recordings based on the date. ¾...
Page 26
View Your Content Use the Filter You can use the filter to find and view recordings based on criteria that you select. ¾ To use the filter to view your library: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar...
View Your Content 2. Tap or click Library. 3. Tap or click the Filter icon in the upper left corner of the page. The Filter page displays. 4. Tap or click Reset at the bottom of the page. Filtering is turned off. The Filter icon becomes an outline to show that filtering is not in use.
Page 28
View Your Content 2. Tap or click Library. The Library page displays. 3. Tap or click a snapshot or video. 4. Tap or click Share Recordings ¾ To share recordings: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser.
Page 29
View Your Content 4. Tap or click 5. Tap or click OK to confirm. The file is sent to Arlo. Delete Recordings ¾ To delete recordings: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser.
3. USB Device Storage With Arlo Pro All recordings are stored in the cloud, but you can optionally connect a USB storage device to the Arlo Pro base station and use the USB storage device as a backup location to store recordings. Simply connect a USB storage device and the base station automatically enables all the settings for you.
USB Device Storage With Arlo Pro View the USB Storage Device Status The Arlo app notifies you if the USB storage device is getting full or if the USB storage device is not the correct format. You can also use the Arlo app to view the USB storage device status.
Page 32
USB Device Storage With Arlo Pro ¾ To safely eject and remove a USB storage device: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. The Devices page displays.
USB Device Storage With Arlo Pro View Video Clips on a USB Storage Device Video clips on USB storage devices do not display in the Arlo app, but you can use a Windows or Mac computer to view the clips. ¾...
USB Device Storage With Arlo Pro A list of devices displays. 3. Tap or click the base station. The Device Settings page displays. 4. Tap or click Local Storage. The Local Storage page displays. 5. Tap or click Automatic Overwrite. The setting changes.
USB Device Storage With Arlo Pro The Device Settings page displays. 6. Tap or click Local Storage. The Local Storage page displays. If you see the message Requires Formatting next to USB Device 1 or USB Device 2, the USB storage device is not in the correct format (FAT32). You must format the USB storage device before you can use it for local storage.
USB Device Storage With Arlo Pro 4. Tap or click Local Storage. The Local Storage page displays. 5. Select a USB storage device. 6. If the message next to the USB storage device is Requires Formatting, follow the formatting procedure. Format a USB Storage Device For more information about formatting, see page 34.
4. Personalize Your System You can customize Arlo Pro settings such as the camera name to make it easier to manage. You can grant access to friends and set up cloud recording. Name Your Camera You can easily customize your Arlo Pro camera by renaming it. ¾...
Page 38
Personalize Your System Change Your Password and User Name ¾ To change your password and user name: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. The Devices page displays.
Personalize Your System 3. Under Account, tap or click Profile. The Profile page displays. 4. Tap Auto Login. Your settings are saved. Grant Access to Friends You can add friends to your Arlo account. Friends can view live streams from your cameras;...
Page 40
Personalize Your System Edit a Friend’s Access Privileges ¾ To edit a friend’s access privileges: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. The Devices page displays. 2.
Page 41
Personalize Your System 4. Select the friend, and Tap or click Edit The Edit page displays. 5. Tap or click Delete Friend. 6. Tap or click Yes. The friend is deleted.
5. Modes, Rules, and Smart Alerts Modes and rules let you tell your Arlo system what to do in different situations. For example, you can set your Arlo system to record a 30-second video when the motion sensor is activated on a specific camera and alert you via email. Modes Modes let you tell your Arlo cameras to respond differently at different times.
Modes, Rules, and Smart Alerts Rules Each mode consists of one or more rules that provide detailed instructions for your Arlo system. For each mode, you can set the following options: • Trigger device. The trigger device is the camera that detects motion or sound. •...
Page 44
Modes, Rules, and Smart Alerts If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. The Devices page displays. 2. Tap or click Mode. A list of cameras displays. 3. Tap or click the Arlo Pro camera. The Mode page displays.
Modes, Rules, and Smart Alerts Change Motion Sensitivity You can easily change the sensitivity level for Arlo Pro cameras. ¾ To change the sensitivity level for a camera: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser.
Modes, Rules, and Smart Alerts Automatically Stop Recording When Motion Stops ¾ To automatically stop recording when motion stops: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar of a browser.
Modes, Rules, and Smart Alerts The Edit Rule page displays. 6. Under If the following, tap or click Edit next to Audio is detected. The Audio Detection page displays. 7. Move the slider to the desired level of audio detection. If you used a mobile device to specify the settings, your settings are saved.
Modes, Rules, and Smart Alerts 8. Set the sliders for Siren Duration and Siren Loudness. 9. Tap < Edit Rule or click Back. 10. Tap Done or click Save. Note: This rule is not active until you activate the mode to which you added the siren trigger.
Modes, Rules, and Smart Alerts 7. Under Alert, tap or click Push Notification to turn alerts on and off for your mobile device. 8. For email notifications, make sure that the Email Alerts check box is selected. 9. To specify an email address, tap or click Edit next to Email Alerts and enter the email address.
Modes, Rules, and Smart Alerts 6. To change the address, tap the Address field, type the address for your location, and then tap Next. The geofence radius displays as Medium. 7. To change your radius setting, tap the Radius icon, select a radius size, and tap Next.
Modes, Rules, and Smart Alerts For more information about adding devices, see Enable or Disable Geofencing for Friends’ Mobile Devices on page 51. • (Required when your friend wants to participate in geofencing) Your friend is logged in to the Arlo App on his or her mobile device and the GPS or location service enabled on your friend’s mobile device.
geofencing accuracy can reach 100–200 meters. Note: If you live in a skyscraper, geofencing might not work reliably due to GPS inaccuracies. Using the Large radius setting might help. • In more rural areas, where cell towers and WiFi routers are sparse, geofencing accuracy can reach several hundred meters.
Page 53
2. Tap or click Mode. A list of cameras displays. 3. Tap or click the Arlo Pro camera. A list of available modes displays. 4. Tap or click Schedule The Schedule mode is selected. 5. Tap or click Edit next to Schedule. 6.
Page 54
Edit a Schedule ¾ To edit a schedule: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. The Devices page displays. 2. Tap or click Mode. A list of cameras displays.
7. Change the start and stop times and Tap or click Save. The schedule is saved. Add a Mode You can add new modes to tell your Arlo Pro camera what to do in certain situations. For example, you can set your Arlo Pro camera to record videos when the motion sensor is activated and to alert you with an email message.
Modes, Rules, and Smart Alerts 8. Tap or click Next. The Audio Settings page displays. 9. Set the audio sensitivity and Tap or click Next. The Devices page displays. 10. When prompted, specify what you want the camera to do when motion or audio is detected and Tap or click Next.
Page 57
Modes, Rules, and Smart Alerts 3. Tap or click the camera. 4. Tap or click Add a Mode. The New Mode page displays. 5. Enter a name for the mode and Tap or click Next. The Trigger Device page displays. 6.
Page 58
Your new mode is saved. or click > next to the mode that you just created. 17. From the mode menu, tap 18. Tap or click Add Rule. 19. Repeat steps 6-16 to add an additional rule with different trigger devices, actions, and alerts.
6. Settings You can customize the Arlo Pro settings. Turn the Arlo App Fingerprint ID Login On and Off The Arlo app supports Touch ID fingerprint identity sensors. If you are using a mobile device with this feature, you can turn the Arlo app Touch ID login on and off. ¾...
Settings 4. Tap or click Time Zone. The Time Zone page displays. 5. Tap or click a time zone. 6. Tap or click Done. If you are using a mobile device, your settings are saved. 7. If you are using a computer, click Save. Your settings are saved.
Page 61
Settings 5. If you are using a computer, click Save. Your settings are saved. Change the Video Resolution The default video resolution is 720P. You can change this setting to a higher or lower resolution. Decreasing the resolution of Arlo Pro videos reduces the required WiFi bandwidth.
Settings Turn Night Vision On and Off When night vision is enabled, the camera automatically turns on infrared (IR) LEDs to record in low light conditions. We recommend that you turn off night vision if the Arlo Pro camera is facing reflective surfaces, such as windows. ¾...
Page 63
Settings 3. Tap or click the camera. The camera settings display. 4. If you are using the Arlo App on a mobile device, tap Audio Settings. The Audio Settings page displays. 5. Tap or click Microphone. Your settings are saved. Change the Speaker Settings You can turn the speaker off and on and you can control the volume on your camera settings.
Settings Base Station Settings You can view or change base station settings. Change the Base Station Name When you set up your Arlo system, you entered a name for the base station. You can change this name. ¾ To change the base station name: 1.
Page 65
Settings A list of devices displays. 3. Tap or click the base station. The base station settings page display. 4. Tap or click Flicker Adjustment. The Flicker Adjustment page displays. 5. Tap or click a setting. 6. Tap or click Save. Your settings are saved.
Page 66
Settings The Devices page displays. 2. Tap or click Settings > My Devices. A list of devices displays. 3. Tap or click the base station. The base station settings page display. 4. Tap or click Restart. The base station restarts. Remove the Base Station From Your Account ¾...
Page 67
Settings Turn On the Siren WARNING: The loudest siren setting, which is the default loudness option for the siren, is more than 100 decibels. Do not test the siren while people or pets are close to the base station. Prolonged exposure to the siren might cause hearing damage. ¾...
Settings View Device Information ¾ To view device information: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar of a browser. The Devices page displays. 2. Tap or click Settings > My Devices. A list of devices displays.
Settings Remove a Camera From Your Account ¾ To remove a camera from your account: 1. Tap the Arlo icon on your mobile device. https://my.arlo.com/#/login If you are using a computer, enter in the address bar of a browser. The Devices page displays. 2.
7. Manage Your Subscription Plan Every Arlo camera includes free Basic service that offers basic features and functionality. When activating your camera, you select your service plan. Subscription Plans Upgrading to a paid service level gives you the ability to increase the uses of your camera to suit your specific needs.
8. Arlo Connect Arlo Connect is a simple way to integrate Arlo devices into other smart home platforms using standard and secure cloud integration. Use Arlo With IFTTT You can use the Arlo app with IFTTT (If This Then That), a free cloud-based service that connects smart home devices and applications.
Page 72
Arlo Connect In advanced Stringify flows, you can use the same Arlo camera twice in the same flow. For example, if your Arlo front door camera detects motion, it’s after 5 p.m., and you’re away from home, you can tell Stringify to trigger a 20-second recording from your Arlo front door camera and a 40-second recording from your Arlo driveway camera.
9. Use SmartThings With Arlo Cameras With Samsung SmartThings, you can integrate your Arlo cameras into the SmartThings app, so all your smart devices can work together. For example, if your Arlo camera detects motion, SmartThings tells your Aeon Labs Siren to trigger your alarm. Arlo camera feed integrated into the SmartThings app...
Use SmartThings With Arlo Cameras Disarm Your Cameras When you integrate your Arlo Wire-Free cameras with SmartThings, a new SmartThings mode is created in the Arlo app. Because SmartThings manages your Arlo cameras, they must be in Disarmed mode before you can begin the integration setup. You cannot use Schedule mode or Geofencing mode at the same time as SmartThings mode.
Use SmartThings With Arlo Cameras 6. Tap Cameras > Arlo. 7. Tap Arlo (connect). 8. Tap Connect to Arlo. 9. Enter your Arlo login credentials 10. On the bottom of the page, accept the Privacy Policy. 11. Tap Done at the upper-right corner. 12.
Use SmartThings With Arlo Cameras If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. The Cameras page displays. 2. Click or tap Mode. A list of devices displays. 3. Click or tap the camera. The Mode page displays.
10. FAQs and Troubleshooting Battery FAQs How can I recharge the Arlo Pro battery? Your Arlo Pro battery is fully charged when it leaves the factory. You can use the power adapter cable to plug the camera into an electrical outlet to charge the battery.
FAQs and Troubleshooting What is the battery life for Arlo Pro rechargeable batteries? The Arlo Pro camera rechargeable battery life is 4 to 6 months with normal usage and can be extended for optimal usage if you use key settings and follow certain tips.
FAQs and Troubleshooting Night Mode • Best video. 600 kbps @ 15 fps • Optimized. 300 kbps @15 fps • Best battery life. 200 kbps @15 fps Depending on the available bandwidth and how much of the buffer is full, the Arlo Pro Wire-Free system either increases the bit rate or decreases the bit rate and frame rate.
Low Battery Recharge or change the battery in the Arlo Pro camera to make sure that the battery level is no less than two bars. A low battery can cause the camera to stream intermittently. Not Receiving Push Notifications You must be logged in to the Arlo app to receive Arlo alerts on your smartphone or mobile device.
Page 81
Check the Arlo App Settings on an iOS Device Make sure that you allow the Arlo app to receive push notifications. The Arlo app push notifications can be disabled on iOS and Android devices. ¾ To allow Arlo push notifications on iOS devices: 1.
Verify That the Arlo Base Station Is Online To determine whether your base station is online, check the Internet LED on the front of the base station: • If the Internet LED is solid green, the base station is connected to the Internet. •...
Page 83
FAQs and Troubleshooting 4. Power cycle your base station. Unplug the power adapter from the outlet, wait one minute, and reconnect the power adapter to the outlet. The base station takes one to two minutes to start. When the Power LED and Internet LED light solid green, your base station is connected to the Internet.
• Internet connection type (DSL, cable, and so on) and speed (Arlo requires at least 1 Mbps upstream) • Internet router model • List of other devices connected directly to your router • The last time and place that your base station successfully connected to the Internet Signal Strength If an Arlo Pro Wire-Free camera’s signal to the base station is weak, recording...
Reset the Arlo Base Station to Factory Settings Performing a factory reset returns your base station values to the default settings. It also removes the serial number from your Arlo account. ¾ To perform a factory reset on your base station: 1.
11. Rechargeable Battery Safety Safety Rules for Arlo Pro Rechargeable Batteries Arlo Pro Wire-Free HD Security Cameras use rechargeable batteries and can go wherever you need them. But ALL batteries can EXPLODE, CATCH FIRE, and CAUSE BURNS if disassembled, punctured, cut, crushed, short-circuited, incinerated, or exposed to water, fire, or high temperatures, so you need to handle them with care.
Rechargeable Battery Safety Safety Rules for Arlo Pro Charging Station The Arlo Pro Charging Station is sold separately. You can use the charging station to charge one or two Arlo Pro rechargeable batteries. For more information about the Arlo Pro Charging Station, see the instructions that are included in the Arlo Pro Charging Station package.