Table of Contents
Advertisement
The Edit Rule page displays.
6. Under If the following, tap or click Edit
The Audio Detection page displays.
7. Move the slider to the desired level of audio detection.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.
Your settings are saved.
Add a Rule That Includes a Siren Trigger
To add a rule that includes a siren trigger, you must add a new mode or edit an
existing mode.
Note:
Only Arlo Wire-Free and Arlo Pro Wire-Free cameras connected to an Arlo Pro base
station can trigger the siren.
For more information about adding a new mode, see
To edit an existing mode, follow these instructions.
¾ To add a rule that includes a siren trigger:
1. Tap the Arlo icon
If you are using a computer, enter
of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of devices displays.
3. Tap or click the Arlo Pro base station.
or click > next to the mode.
4. Tap
5. Under Rules, tap
6. Select the Turn Siren ON check box.
or click > next to Sound Alarm.
7. Tap
Modes, Rules, and Smart Alerts
on your mobile device.
https://my.arlo.com/#/login
or click Edit next to the camera.
47
next to Audio is detected.
Add a Mode
on page 55.
in the address bar
Advertisement
Table of Contents
