Table of Contents
Advertisement
•
Make sure that side-to-side traffic crosses Arlo's field of view. Arlo's
motion sensor is much more sensitive to side-to-side movement across its field
of view than to movement directly toward or away from the camera. The best
area for motion detection is 5 feet to 20 feet (1.5 to 6 meters) from the camera
position.
You can use the Motion Detection Test to verify if motion can be detected in a
camera's current placement. The camera's LED flashes amber when motion is
detected. Go to your camera's Settings to turn on the Motion Detection Test.
Position Mode
Position mode is available only when the camera is not streaming, recording motion,
or in Motion Detection mode.
¾ To place your camera in Position mode:
1. Tap the Arlo icon
If you are using a computer, enter
of a browser.
If you are using a mobile device that supports Touch ID, you are prompted to
enable Touch ID or skip.
2. Tap or click Settings.
The Settings page displays.
3. Under Camera Settings, select the camera to position.
4. Tap or click Position Mode.
The camera starts streaming video.
Set Up Your System
on your mobile device.
https://my.arlo.com/#/login
16
in the address bar
Advertisement
Table of Contents
