Geofencing Accuracy - NETGEAR VMS4130-100EUS User Manual

For more information about adding devices, see
for Friends' Mobile Devices
• (Required when your friend wants to participate in geofencing) Your friend is
logged in to the Arlo App on his or her mobile device and the GPS or location
service enabled on your friend's mobile device.
Enable or Disable Geofencing for Friends' Mobile Devices
¾ To enable or disable geofencing for your friends' mobile devices:
1. Tap the Arlo icon
The Devices page displays.
2. Tap Mode.
A list of cameras displays.
3. Tap or click the camera.
A list of available modes displays.
4. Tap the Edit
The Geofencing editing page displays.
5. Tap Enabled Devices.
The Enabled Device page displays a list of geofencing-enabled mobile devices.
6. Tap the mobile devices that you want to enable for geofencing.
A check mark appears next to the device name when geofencing is enabled.
Note: The device location displays as either In Zone or Out of Zone.
7. To disable geofencing, tap the mobile device again.
The check mark disappears when geofencing disabled.
For more information, see

Geofencing Accuracy

For accuracy, geofencing uses a combination of GPS, cellular data, and WiFi data.
The local environment affects geofencing as follows:
• In urban environments, where the cell towers and WiFi routers are more dense,
Modes, Rules, and Smart Alerts
on page 51.
on your mobile device.
icon. next to Geofencing
Set Up Geofencing
51
Enable or Disable Geofencing
on page 49.