Adjust Push Notifications - NETGEAR VMS4130-100EUS User Manual

If you are using a computer, enter
of a browser.
The Cameras page displays.
2. Click or tap Mode.
A list of devices displays.
3. Click or tap the camera.
The Mode page displays.
4. If you are not sure what motion sensitivity level you have been using, click or
tap Edit
The Edit Rule page displays.
5. Click or tap Edit
6. Under If the following, click or tap Edit
The Motion detection settings page displays.
7. Note the motion sensitivity setting, but do not select Armed mode.
8. Return to the Mode page.
9. Click or tap Edit
The Edit Rule page displays.
10. Click or tap Edit
11. Under If the following, click or tap Edit
The Motion detection settings page displays.
12. Set the motion sensitivity level to match the setting that you viewed in Step 7.

Adjust Push Notifications

When you integrate Arlo with SmartThings, the Arlo app sends push notifications to
the SmartThings app. Then the SmartThings app sends you notifications about Arlo
and your other smart things. If you still receive push notifications from Arlo, on your
smartphone, use your smartphone settings to turn off the Arlo notifications. Email
notifications are not needed.
Use SmartThings With Arlo Cameras
next to Armed mode.
next to the rule that you want to edit.
next to SmartThings mode.
next to the rule that you want to edit.
https://my.arlo.com/#/login
next to Motion is detected.
next to Motion is detected.
76
in the address bar