GE Amersham Imager 680 Operating Instructions Manual page 162

5 Operation
5.5 Capture an image
5.5.4 Fluorescence capture
Step
8
9
10
11
162
Action
Choose (red arrows) to adjust the upper range of the grayscale in
the displayed image indicated by the red line in the image histogram.
Enter Contrast values manually if needed.
Choose one of the two options displayed to the right of the image to point
out the area of interest:
•
Choose then select one point of interest in the image.
Result: The selected point is highlighted with an X.
•
Use the button to point out two diagonal corners of an area.
Result: The selected area is highlighted with a square.
Use the right hand side arrow buttons to move the highlighted point or area.
Click Start exposure and wait for the exposure to finish.
When the exposure is finished the image view displays the image. Amersham
Imager 680 creates a folder containing the image files which can be saved.
For details see File formats, on page 174.
Select the Save button to save the images.
For other options after capturing see Options after capturing, on page 135.
Amersham Imager 680 Operating Instructions 29271308 AB