Turn Off The Instrument - GE Amersham Imager 680 Operating Instructions Manual

5.9

Turn off the instrument

This section describes the instrument shutdown procedure.
Follow the instruction below to turn off the instrument when capturing and analysis is
finished for the day.
Step
1
2
Note:
Amersham Imager 680 Operating Instructions 29271308 AB
Action
Press the On/Off button on the front panel.
Result: The LED Power light shuts down.
Press the Power switch button on the right side of the instrument to the O
position.
Result: The instrument is turned off.
To optimize the instrument's life time and to minimize unnecessary power
consumption, shut down the instrument when image captures and analyses
have been completed for the day. If the Amersham Imager 680 instrument is
used around the clock, make sure to restart the system at least once a day to
remove temporary files that may take up unnecessary memory space.
5 Operation

5.9 Turn off the instrument

199