Service - GE Amersham Imager 680 Operating Instructions Manual

4 Installation
4.3 System settings

4.3.4 Service

4.3.4 Service
Introduction
In the Service view the following information can be found:
•
•
•
•
The view also displays buttons for software update and export log functions.
Update software
Follow the instructions below to update the software for Amersham Imager 680.
Step
1
2
3
4
84
Instrument serial number
Software version
Firmware version
FPGA version
Action
Connect a USB flash drive containing the update file provided by GE stored
at the root level of the USB flash drive.
Select the Software update button.
Confirm USB insertion by selecting the OK button.
Select the Yes button to update the software.
Amersham Imager 680 Operating Instructions 29271308 AB