Accessories - GE Amersham Imager 680 Operating Instructions Manual

7 Maintenance

7.2 Accessories

7.2 Accessories
Introduction
Amersham Imager 680 accessories must be cleaned after use. This section describes
recommended cleaning agents and how to clean the accessories.
Recommended cleaning agents
The accessories may be washed with water and one of the following:
•
•
•
•
Cleaning sample trays, white
insert and diffuser board
232
NOTICE
Cleaning agents should be for biochemical use to avoid that
residues fluoresce when images are captured.
70% ethanol
Mild, neutral detergent
Isopropanol
6% H O
2 2
CAUTION
Wear gloves while cleaning. There may be residues of hazardous
chemicals.
NOTICE
Do not use organic solvents. These may damage the surface.
Amersham Imager 680 Operating Instructions 29271308 AB