Makita EN422MP Instruction Manual page 8

9. Remove the dust guard from the shear blades,
and then attach it in the position shown in the figure on
the new shear blades.
Fig.15
► 1 . Dust guard
10. Insert the bolt removed in step 5 into the hole on
the shear blades through the hole on the blade cover.
2
Fig.16
► 1 . Hole 2. Bolt
1
1
1
8 ENGLISH
11. Apply a small amount of grease to the periphery of
the crank. Attach the shear blades to the attachment.
Fig.17
12. Attach the sleeves, plate (small) to the shear
blades, and then tighten the bolt.
2
3
Fig.18
► 1 . Bolt 2. Plate (small) 3. Sleeve
13. Remove the bolt inserted into the hole on the
shear blades in step 10, and then tighten it to fix the
shear blades.
1