Table of Contents
Advertisement
Available languages
Available languages
Loading objects
1.
Do not overload objects. When loading
objects, be sure to follow the instructions and
load limits in the manual.
2.
Since the larger the load, the more difficult it
is to operate the machine, keep the load within
the range that does not affect the operation.
3.
Firmly secure the objects with ropes.
4.
Load the objects within the carrier, bucket,
or flat bucket. If the objects protrude from the
carrier, bucket, or flat bucket, there is a risk of
accidents due to the objects falling or contact
obstacles such as walls.
Be sure that loaded objects are below eye
5.
level. If the load is too high, it is dangerous
because the view is obscured. Also, there is a risk
of overturning and injury because the load is likely
to be unbalanced.
6.
Load the objects on the carrier, bucket, or flat
bucket evenly. If the objects are loaded unevenly,
there is a risk of overturning and injury because
the load is likely to be unbalanced.
7.
Before loading the objects or operating the
machine, make sure that the handle of the
dump unit is fully pulled down and completely
locked.
8.
Be sure to load heavy objects first to keep
balance.
9.
Do not extend the front and side rails on steep
slopes. Extend the side rails when lightweight
objects are loaded.
10. When extending the front and side rails, do not
extend them over the extension limit. Be sure
to extend the side rails so that the right and
left sides are the same length, and load objects
evenly.
11.
Load and unload objects on flat ground. Never
load or unload objects on slope.
12. When lifting and tilting the carrier or bucket,
hold the handles and frame firmly, and work in
a stable posture.
13. When loading liquids, be careful not to spill
them. Spilling them may cause slipping and cause
an injury.
Transportation of machine
1.
Use the ladder rails that are at least 4 times
as long as the height of the truck bed, with
fixtures suitable for the bed, with a non-slip
surface and sufficient width, and capable of
withstanding the weight of the machine and
operator. Read the instruction manual of the
ladder rails carefully before use.
Before loading the machine, unload all objects
2.
from the machine and remove mud and other
debris from the tires. Install the ladder rails on
a flat and stable surface.
3.
Before loading or unloading the machine,
make sure that there are no people around the
machine and the ladder rails. Load or unload
the machine at low speed, taking care to pre-
vent the machine from falling off the ladder
rails, and not to hit your head on the ceiling of
the truck. Use extreme caution when loading
or unloading the machine backward.
4.
When transporting the machine, lock the brake
lever, turn the power off, remove the batteries
and lock key, and fix the machine securely.
Maintenance
1.
Before storage or attempting to perform
inspections or maintenance, always be sure
to stop the machine on flat ground and lock
the brake lever, and turn off the machine, and
remove the lock key and battery cartridges.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
Symbols
The followings show the symbols used for tool.
volts
direct current
Important safety instructions for
battery cartridge
Before using battery cartridge, read all instruc-
1.
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
Do not disassemble or tamper with the battery
2.
cartridge. It may result in a fire, excessive heat,
or explosion.
If operating time has become excessively
3.
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5.
Do not short the battery cartridge:
Do not touch the terminals with any con-
(1)
ductive material.
(2)
Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3)
Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
Do not store and use the tool and battery car-
6.
tridge in locations where the temperature may
reach or exceed 50 °C (122 °F).
Do not incinerate the battery cartridge even if
7.
it is severely damaged or is completely worn
out. The battery cartridge can explode in a fire.
7 ENGLISH
Advertisement
Table of Contents
