Beep Button - Makita XUC04 Instruction Manual

Battery powered wheelbarrow
Table of Contents

Advertisement

Available languages

Available languages

To turn on the machine, lock the brake lever and
release the switch trigger, and then press the power
button. The main power lamp lights up in green. To turn
off the machine, lock the brake lever, and then press the
power button.
NOTE: An electrical test is performed the first time
the machine is driven after the machine is turned on.
If a problem is detected, the main power lamp blinks
in red or green alternately. In this case, refer to the
section for troubleshooting.
NOTE: If the main power lamp lights up in red or
blinks in red or green, refer to the instructions for
machine/battery protection system or the section for
troubleshooting.
NOTE: This machine employs the auto power-off
function. To avoid unintentional start up, the machine
will automatically shut down when the machine is
stopped and not operated for a certain period after
the machine is turned on.
NOTE: If you press the power button while pulling the
switch trigger, the machine does not turn on. Release
the switch trigger, and then press the power button.
Forward/reverse and speed button
1
2
Fig.37
► 1. Forward/reverse button 2. Speed button
Press the forward/reverse button to switch between the
forward mode and reverse mode. Press the speed but-
ton to switch between low speed, medium speed, and
high speed. When the power is turned on, the forward
mode and low speed are set.
NOTE: The forward/reverse button is not available
while pulling the switch trigger.
NOTE: A short beep sound comes out when operat-
ing the machine in reverse.
NOTE: The speed button is not available when oper-
ating the machine in reverse.

Beep button

When you press the beep button, the beep sound is
emitted.
Fig.38
► 1. Beep button
NOTE: The beep button is available when the
machine is turned on.
NOTE: The beep button is available even if the lock
key is not inserted in the battery box.
Lighting up the lamps
Press the lamp button on the battery box to light up the
front lamps and rear lamp. To turn off the lamps, press
the lamp button again.
Fig.39
► 1. Lamp button 2. Front lamp
19 ENGLISH
1
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xuc05Xuc06Xuc05z

Table of Contents