Operation; Operating The Machine - Makita XUC04 Instruction Manual

Neutral change lever
WARNING:
Unless absolutely necessary,
never disable the electric brake of the machine
with the neutral change lever. Since the electric
brake of the machine is disabled, the machine may
move unintentionally and cause an accident or per-
sonal injury.
WARNING:
Be sure to return the neutral
change lever to its original position after pulling
the lever outward.
NOTICE:
In case of an emergency, you can
move the machine manually by pulling the neu-
tral change lever outward to disable the electric
brake.
NOTICE:
You need to lock the brake lever to
move the neutral change lever.
You can unlock the electric brake of the machine using the
neutral change lever. To unlock the electric brake, lock the
brake lever, and then pull the neutral change lever outward.
Fig.50
► 1. Neutral change lever
NOTICE:
Before returning the neutral change
lever, lock the brake lever. Make sure that the
neutral change lever is fully returned as shown in
the figure.
1
Fig.51
► 1. Neutral change lever
1
22 ENGLISH
Using the level
Using the level, you can check if the ground is level.
1
Fig.52
► 1. Level

OPERATION

CAUTION:
Be sure to lock the brake lever
before loading, unloading, and dumping objects,
or draining liquid.

Operating the machine

NOTICE:
Be sure to insert the lock key before
the operation. If the lock key is not inserted, a beep
sound is emitted when you pull the switch trigger. The
beep sound stops by releasing the switch trigger and
pulling the brake lever.
NOTICE:
Perform the inspection before operating the
machine by referring to the section for maintenance.
1. Make sure that the brake lever is locked. Install the bat-
tery cartridges, and insert the lock key and turn it clockwise.
2. Select the battery cartridges with the battery
selection switch.
3.
Press the power button on the control panel to turn
the power on.
Fig.53
► 1. Power button
1