Adjusting The Handle Height; Rear Wheel Lock - Makita XUC04 Instruction Manual

Adjusting the handle height

NOTICE:
Fix the left and right handles at the
same height.
The handle height can be adjusted in 7 levels. To adjust
the handle height, loosen 2 knobs, then adjust the handle
height by aligning the hole on the handle with the protru-
sion on the rear frame, and then tighten 2 knobs securely.
Adjust the height of the other handle in the same way.
Fig.45
► 1. Knob

Rear wheel lock

You can fix the direction of the rear wheels using the rear wheel lock.
1.
Slightly move the machine forward so that the rear
wheels face the direction shown in the figure.
Fig.46
► 1. Rear wheel
2. Rotate the rear wheel lock toward the rear.
Fig.47
► 1. Rear wheel lock
1
1
1
3. Lock the other rear wheel in the same way.
4. Move the rear wheel back and forth or left and
right slightly to make sure it is locked.
To release the rear wheel lock, rotate the rear wheel
lock 90° as shown in the figure.
Fig.48
► 1. Rear wheel lock
NOTE: The rear wheels can be fixed in 4 different
directions as shown in the figure.
Fig.49
21 ENGLISH
1