Makita XUC04 Instruction Manual page 12

5. Place the dump unit on the base unit by holding
the dump unit with two people as shown in the figure.
Fig.12
6. Temporarily tighten 2 bolts at the rear of the
machine. Tighten the rest of 4 bolts securely, and then
tighten 2 bolts at the rear of the machine securely.
1
Fig.13
► 1. Bolt (front) 2. Bolt (rear)
7.
Fig.14
► 1. Cord cover
Removing the dump unit
To remove the dump unit, perform the installation proce-
dure in reverse.
Installing or removing the bucket
Optional accessory
Installing the bucket
1.
Fig.15
► 1. Bucket 2. Stay 3. Front pipe
2.
lower frame of the dump unit.
2
Fig.16
► 1. Front pipe
12 ENGLISH
Attach the cord cover.
1
Take out the bucket, stays, and front pipe from the box.
Insert the front pipe between the upper frame and
1
1
2
3