Inspection Before Operation; Maintenance; Cleaning The Machine - Makita XUC04 Instruction Manual

Battery powered wheelbarrow
Table of Contents

Advertisement

Available languages

Available languages

Draining liquid
CAUTION:
Before draining the liquid, be sure
to lock the brake lever.
To drain the liquid inside of the flat bucket, loosen and
remove the cap of the flat bucket. Tighten the cap after
the draining.
Fig.62
► 1. Cap
NOTE: When removing the cap, be careful as the
cap may be pushed out by the pressure of liquid. Be
careful not to get the liquid on your face or other parts
of your body.

MAINTENANCE

CAUTION:
Always be sure to park the
machine on flat ground and lock the brake lever
before storage or attempting to perform inspec-
tions or maintenance.
CAUTION:
Always be sure that the lock
key and battery cartridge are removed from
the machine before storage, inspections, or
maintenance.
CAUTION:
Always remove the lock key when
the machine is not in use. Store the lock key in a
safe place out of reach of children.
1
25 ENGLISH

Inspection before operation

Perform the following inspections before operation the machine.
Check that the bolts, nuts, and knobs are tightened firmly.
Fig.63
Check that the brake is working properly. If you
feel the brake is not working sufficiently, perform
the cleaning of the brake, or adjust the brake lever
by referring to the section for adjusting the brake.
Check that the dump unit is locked when the han-
dle of the dump unit is fully pulled down.
Fig.64
► 1. Handle
Check that the tires of front and rear wheels are
not damaged, and the air in the tires is sufficient.
Check that the front lamps, rear lamp, and reflec-
tor are clean. Clean them if necessary.

Cleaning the machine

NOTICE:
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks may result.
NOTICE:
Do not use the high pressure washer
for cleaning.
NOTICE:
When cleaning the machine, be sure to close
the cover of battery box. Otherwise, water may enter into
the battery box, and cause a malfunction of machine.
Remove mud, dirt, and the like from the machine. Clean
the machine with running water. After the cleaning, wipe
the machine with a dry cloth.
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xuc05Xuc06Xuc05z

Table of Contents