Voip-To-Pstn Gateway Setup Section - Cisco Small Business Pro SPA3102 Administration Manual

ATA Voice Field Reference
PSTN Line page (SPA3102)
ATA Administration Guide
Voice tab > PSTN Line page >

VoIP-To-PSTN Gateway Setup section

VoIP-To-PSTN
Gateway Enable
VoIP Caller
Authentication
Method
VoIP PIN Max Retry Number of trials to allow VoIP caller to enter a PIN number
One Stage Dialing
Line 1 VoIP Caller
DP
Default VoIP Caller
DP
Line 1 Fallback DP
Enable or disable VoIP-To-PSTN Gateway functionality.
The default is yes.
Method to be used to authenticate a VoIP Caller to access
the PSTN gateway. Choose from {none, PIN, HTTP Digest.
The default is none.
(used only if authentication method is set to PIN).
The default is 3.
Enable one-stage dialing (applicable if authentication
method is none, or HTTP Digest, or caller is in the Access
List).
The default is yes.
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is calling from Line 1 of the same SPA3102
unit during normal operation (in other words, not due to
fallback to PSTN service when Line 1 VoIP service is
down). Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}
Authentication is skipped for Line 1 VoIP caller.
The default is 1.
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is not authenticated. Choose from {none, 1,
2, 3, 4, 5, 6, 7, 8}.
The default is 1.
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is calling from Line 1 of the same SPA3102
unit due to fallback to PSTN service when Line 1 VoIP
service is down. Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}.
The default is 1.
B
202