Cisco Small Business Pro SPA3102 Administration Manual page 223

Provisioning Reference (WRP400)
NOTE
Feature/XML
Tag
Wireless QoS
<WL_QOS>
Internet Access
Priority
<RT_QOS>
ATA Administration Guide
This chapter provides information about the parameters that can be provisioned
from an XML profile by using the profile compiler tool (SPC).
For instructions about provisioning, see the SPA Provisioning Guide in Cisco
Partner Central, http://www.cisco.com/web/partners/sell/smb.
Parameters
<WL_QOS>wl_wme,wl_wme_no_ack
</WL_QOS>
wl_wme: WMM support (Wi-Fi
Multimedia); on (enabled) or off
(disabled)
wl_wme_no_ack: No-
acknowledgement option; on
(enabled) or off (disabled)
<RT_QOS>QoS,rate_mode,manual_
rate</RT_QOS>
QoS: Internet access priority; 1
(enabled) or 0 (disabled)
rate_mode: Upstream bandwidth
type; 0 (manual) or 1 (automatic)
manual_rate: Upstream bandwidth
rate; numerals from 64 to 50000
Examples
To enable WMM with the No-
acknowledgement option turned off:
<WL_QOS>wl_wme=on,wl_wme_no_
ack=off</WL_QOS>
To enable Manual QoS and specify the
upstream bandwidth rate:
<RT_QOS>QoS=1,rate_mode=0,
manual_rate=5000</RT_QOS>
To enable Auto QoS: <RT_QOS> QoS=1,
rate_mode=1</RT_QOS>
To disable QoS: <RT_QOS>QoS=0
</RT_QOS>
C
221