Cisco Small Business Pro SPA3102 Administration Manual page 201

ATA Voice Field Reference
PSTN Line page (SPA3102)
ATA Administration Guide
G723 Enable
Echo Canc Adapt
Enable
G726-16 Enable
Echo Supp Enable
G726-24 Enable
FAX CED Detect
Enable
G726-32 Enable
FAX CNG Detect
Enable
G726-40 Enable
FAX Passthru
Codec
DTMF Process
INFO
To enable the use of the G723a codec at 6.3 kbps, select
yes. Otherwise, select no.
The default is yes.
To enable the echo canceller to adapt, select yes.
Otherwise, select no.
The default is yes.
To enable the use of the G726 codec at 16 kbps, select
yes. Otherwise, select no.
The default is yes.
To enable the use of the echo suppressor, select yes.
Otherwise, select no.
The default is yes.
To enable the use of the G726 codec at 24 kbps, select
yes. Otherwise, select no.
The default is yes.
To enable detection of the fax Caller-Entered Digits (CED)
tone, select yes. Otherwise, select no.
The default is yes.
To enable the use of the G726 codec at 32 kbps, select
yes. Otherwise, select no.
The default is yes.
To enable detection of the fax Calling Tone (CNG), select
yes. Otherwise, select no.
The default is yes.
To enable the use of the G726 codec at 40 kbps, select
yes. Otherwise, select no.
The default is yes.
Select the codec for fax passthrough, G711u or G711a.
The default is G711u.
This field is not available for the PAP2T. To use the DTMF
process info feature, select yes. Otherwise, select no.
The default is yes.
B
199