Supplementary Service Subscription Section - Cisco Small Business Pro SPA3102 Administration Manual

ATA Voice Field Reference
Line page
ATA Administration Guide
Use Auth ID
Auth ID
Directory Number
Call Capacity
Cfwd No Ans Delay Delay, in seconds, before the call forwarding of no-answer
Mini Certificate
SRTP Private Key
Voice tab > Line page >

Supplementary Service Subscription section

The ATA device provides native support of a large set of enhanced or
supplementary services. All of these services are optional. The parameters listed
in the following table are used to enable or disable a specific supplementary
service. A supplementary service should be disabled if a) the user has not
subscribed for it, or b) the Service Provider intends to support similar service
using other means than relying on the ATA device.
Call Waiting Serv
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the
user ID and password.
The default is no.
Authentication ID for SIP authentication.
Enter the number for this line.
Maximum number of calls allowed on this line interface.
Choices: {unlimited,1,2,3,...25 }. Default is 16. Note that the
the ATA device does not distinguish between incoming and
outgoing calls when talking about call capacity.
NOTE: unlimited = 16
calls feature is triggered.
The default is 20.
Base64 encoded of Mini-Certificate concatenated with the
1024-bit public key of the CA signing the MC of all
subscribers in the group.
The default is empty.
Base64 encoded of the 512-bit private key per subscriber
for establishment of a secure call.
The default is empty.
Enable Call Waiting Service.
The default is yes.
B
175