2.3 SPA112 Back Panel
Feature
Description
Reset
No not press the reset button under any
circumstances. This will permanently disable the
operation of the unit.
Phone 1,
Connect to an analogue phone, using the UK Phone
adaptor provided
Phone 2 (Gray)
Internet (Blue)
Connect to a broadband network device (DSL or
cable modem) or a network router, using an Ethernet
cable.
Power
Connect to a power source, using the provided
power adapter.
2.4 Network Setup
Please follow the instructions below
Connect the Internet cable directly into your ADSL router.
•
Plug in the phone(s) that you are going to use now, using the UK/RJ11 phone
•
adaptors if necessary.
Insert power lead. Power on the Cisco and wait for 60 seconds
•
Copyright © 2005-2012 Jaguar Telecom
Version 1.8
Page 4 of 8