Connect With Activation Code Onboarding; Connect To Expressway; Install The Wired Expansion Microphones - Cisco 8832 User Manual

Your Phone
Procedure
Step 1
Enter your Wi-Fi credentials when prompted.
Step 2 Select Sign-in.

Connect with Activation Code Onboarding

If your network has been configured to support this feature, then you can use Activation Code Onboarding
to connect to your company's phone network.
Enter an Activation Code
Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.
Contact your administrator if you don't know your code or if you need a new one.
Procedure
Step 1
Enter your activation code on the activation screen.
Step 2 Press Submit.

Connect to Expressway

You can use Mobile and Remote Access Through Expressway to connect to your corporate network when
you are working away from your office.
Procedure
Step 1
Reset service mode through Settings > Admin Settings > Reset Settings > Service mode.
Step 2 Press Select when prompted to change the service mode.
Step 3
Enter the service domain and press Continue.
Step 4 Enter your username and password.
Step 5
Select Sign in.

Install the Wired Expansion Microphones

The phone supports an optional kit with two wired expansion microphones. You can extend the microphones
up to 7 feet (2.13m) from the phone. For best results, place the microphones between 3 feet (0.91 m) and 7
feet (2.1 m) away from the phone.
Connect with Activation Code Onboarding
Cisco IP Conference Phone 8832 User Guide
7