Cisco 8832 User Manual page 21

Your Phone
Figure 10: Conference Phone Installation in Daisy Chain Mode
Replace Your Existing Phone with a New Phone
You can change your phone model. The change can be required for a number of reasons, for example:
• You have updated your Cisco Unified Communications Manager (Unified CM) to a software version
• You wants a different phone model from their current model.
• Your phone requires repair or replacement.
Limitation: If the old phone has more lines or line buttons than the new phone, the new phone doesn't have
the extra lines or line buttons configured.
The phone reboots when the configuration is complete.
Before you begin
Your administrator needs to set up Cisco Unified Communications Manager to enable the phone migration.
You need a new phone that hasn't been connected to the network or previously configured.
Procedure
Step 1 Power off the old phone.
Step 2
Power on the new phone.
Step 3 If prompted, enter your activation code.
Step 4
Select Replace an existing phone.
Step 5 Enter the primary extension of the old phone.
Step 6
If the old phone had a PIN assigned, enter the PIN.
that doesn't support the phone model.
Replace Your Existing Phone with a New Phone
Cisco IP Conference Phone 8832 User Guide
13