Cisco 8832 User Manual page 13

Your Phone
• Wireless connection—The Cisco IP Conference Phone 8832 can connect to a Wireless Access Point
using Wi-Fi. This deployment requires the power supply (CP-8832-PWR or CP-8832-PWR-WW).
Mobile and Remote Access Through Expressway—If your administrator sets up Mobile and Remote Access
Through Expressway and you connect your phone to the network, it connects to the Expressway server.
Note CP-8832-ETH and CP-8832-PWR are for North America. CP-8832-ETH-WW and CP-8832-PWR-WW are
for other locations.
Figure 2: PoE Deployment
Figure 3: Non-PoE Deployment
• PoE deployment: Connect the phone to the Cisco IP Conference Phone 8832 PoE Injector
(CP-8832-POE) and connect the injector to the network with an Ethernet cable.
• Non-PoE deployment: Connect the phone to the Cisco IP Conference Phone 8832 Non-PoE
Ethernet Injector (CP-8832-ETH or CP-8832-ETH-WW). Then, connect the injector to the network
with an Ethernet cable and plug the injector into the electric outlet.
Cisco IP Conference Phone 8832 User Guide
Connect to the Network
5