Install The Wireless Expansion Microphones - Cisco 8832 User Manual

Install the Wireless Expansion Microphones

Procedure
Step 1
Plug the end of the microphone cable into the port on the side of the phone.
Step 2 Extend the microphone cable to the desired position.
The following figure shows installation of a wired expansion microphone.
Figure 5: Wired Expansion Microphone Installation
Related Topics
Install the Wireless Expansion Microphones
The conference phone provides the option of connecting two wireless expansion microphones.
Note You must use either two wired microphones or two wireless microphones with the phone, but not a mixed
combination.
When the phone is in a call, the LED on the expansion microphone is lit green. To mute the expansion
microphone, press the Mute key. When the microphone is muted, the LED is lit red. When the battery in the
microphone is low, the battery indication LED blinks rapidly.
Before you begin
Disconnect the wired expansion microphones before you install wireless expansion microphones. You cannot
use both wired and wireless expansion microphones at the same time.
Cisco IP Conference Phone 8832 User Guide
8
Wired Expansion Microphone, on page 19
Your Phone