Product Contents; Installation And Wiring; Preparation Guide; Pump Location - Black & Decker BDXBTAGVAR Instruction Manual

Installation & Operation Manual

2.7 Product Contents

ITEM DESCRIPTION
1 Variable Speed Pump
2 Installation and Operation Manual
3 Large Drawstring Bag
Hose Adapters (2)
O-Ring (2)
4
Union Nut (2)
Tailpiece 1.5" (2)

3. Installation and Wiring

3.1 Preparation Guide

Upon receipt of the pump, check the carton for damage. Open the carton and check the pump for concealed
damage, such as cracks, dents, or a bent base. If damage is found, contact the shipper or distributor where
the pump was purchased.
Inspect the contents of the carton and verify that all parts are included. See Section 2.7, Product Contents.

3.2 Pump location

The Black & Decker Above-Ground pump MUST be installed below the pool water line.
Place pump on solid foundation which provides a rigid and vibration-free support so that it is readily accessible for
service and maintenance.
Install the pump in a well-ventilated location protected from direct sunlight and excessive moisture.
Protect the pump against flooding, and prevent foreign objects from clogging air circulation around motor. All motors
generate heat that must be removed by providing proper ventilation.
1
2
ENGLISH Page 7
4 3