Introduction; Pump Overview; Controller Overview - Black & Decker BDXBTAGVAR Instruction Manual

Installation & Operation Manual
2. General Information

2.1 Introduction

This manual contains information for the proper installation and operation of the Black & Decker
variable speed pump family. The instructions in this manual MUST be followed precisely. Black & Decker
Variable Speed Pumps can be run from 1000 RPM to 3450 RPM. This allows you to select the most appropriate
speed for your application.

2.2 Pump Overview

The perfect choice for all types of pools, the Variable Speed Pump was specifically designed to be
your best choice for a variety of in-ground pools. Thick walled body parts, a heavy duty TEFC motor, and
highly engineered hydraulics make this rugged and tested design perfect for any pool, spa, water feature, or
fountain.

2.3 Controller Overview

The Variable Speed Pump uses a premium efficiency variable speed motor that provides tremendous program
flexibility in terms of motor speed and duration settings. The pump is intended to run at the lowest speeds needed
to maintain a sanitary environment, which in turn minimizes energy consumption. Pool size, the presence of
additional water features, chemicals used to maintain sanitary conditions, and local environmental factors will
impact optimal programming necessary to maximize energy conservation.
The integrated electronics interface controls the speed settings as well as the run durations. The pump can
operate at speeds ranging between 1000 and 3450 RPM and will operate within the voltage range of 115Vrms
at either 50 or 60Hz input frequency. Program customization may require some trial-and-error to determine the
most satisfactory settings as dictated by the conditions. In most cases, setting the pump at the lowest speed
for the longest duration is the best strategy to minimize energy consumption. However, conditions may require
running the pump at a higher speed for some duration of time each day to maintain proper filtration to achieve
satisfactory sanitation.
Note: Optimize the pump to suit individual pool conditions. Specific conditions including pool size, other devices,
features, and environmental factors can all impact the optimal settings.
General Features
• Totally enclosed, permanent magnet motor.
• Advanced hydraulic design.
• Programmable with up to 3 custom speeds.
• For enhanced pool management, can be controlled by third party pool and spa control platforms.
• Motor drive includes built-in protection for high temperatures and voltage fluctuations.
ENGLISH Page 5