NETGEAR FVM318 Reference Manual page 83

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Figure 5-12: Security Policy Editor My Identity
• Choose None in the Select Certificate menu.
• Select IP Address in the ID Type menu. If you are using a virtual fixed IP address,
enter this address in the Internal Network IP Address box. Otherwise, leave this box
empty. Use 192.168.100.2 for this example.
• In the Internet Interface box, select the adapter you use to access the Internet. Select
PPP Adapter in the Name menu if you have a dial-up Internet account. Select your
Ethernet adapter if you have dedicated Cable or DSL line. You may also choose Any
if you will be switching between adapters or if you have only one adapter.
• Click the Pre-Shared Key button. In the Pre-Shared Key dialog box, click the Enter
Key button. Enter the FVM318's Pre-Shared Key and click OK. In this example,
r>T(h4&3@#kB would entered. Note that this field is case sensitive.
Configure the VPN Client Authentication Proposal.
f.
In this step, you will provide the type of encryption (DES or 3DES) to be used for this
connection. This selection must match your selection in the FVM318 configuration.
• In the Network Security Policy list on the left side of the Security Policy Editor
window, expand the Security Policy heading by double clicking its name or clicking
on the "+" symbol.
Virtual Private Networking 5-15