Pc To Network Vpn Tunnel Configuration Worksheet - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Note: If your situation is different, for example, if you wish to use different VPN client software,
please see http://www.netgear.com/docs
LAN A
IN TER N ET W LA N
Cable/DSL ProSafeWirelessVPN Security Firewall
LNK
PWR TEST
ACT Enable
1
192.168.3.1
Figure 5-7: PC to LAN VPN access from a
The sample configuration worksheet below is filled in with the parameters used in the procedure
below. A blank worksheet is on

PC to Network VPN Tunnel Configuration Worksheet

IKE Tunnel Security Association Settings
Connection Name:
PreShared Key:
Secure Association -- Main Mode or Aggressive Mode:
Perfect Forward Secrecy:
WAN Encryption Protocol
-- Null
-- IPSec (DES, 3DES, or AES 128, 192, or 256)
Wireless Encryption Protocol
-- Disable
-- IPSec (DES, 3DES, or AES 128, 192, or 256)
-- WEP (64-bit or 128-bit)
Key Life in seconds:
IKE Life Time in seconds:
FVM318
and PC IP Settings
Network: LAN A LANAPCIPSEC 192.168.3.1
Computer: PC
Virtual Private Networking
for additional VPN configuration information.
FVM318
LO CA L MODEL
100
LNK/ACT
2 3 4 5 6 7 8
page 5-23.
Local IPSec
Identifier
PCIPSEC
VPN Tunnel
PC to an FVM318
LAN IP Subnet Mask
Address
255.255.255.0
192.168.100.2 255.255.255.255
Remote user with
VPN client software
VPNLANPC
r>T(h4&3@#kB
Main
Enabled
DES
N/A
(1 hour)
3600
(8 hours)
28800
Gateway IP
(WAN IP Address)
24.0.0.1
0.0.0.0
5-9