NETGEAR FVM318 Reference Manual page 78

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
1. Configure the VPN Tunnel on the FVM318 on LAN A.
To configure the firewall, follow these steps:
From the Setup Menu, click the VPN Settings link, then click Add to configure a new
a.
VPN tunnel. The VPN Settings - IKE window opens as shown below:
Figure 5-8: VPN Edit menu for connecting with a VPN client
Fill in the Connection Name VPN settings as illustrated.
b.
• Connection Name: VPNLANPC
• Local IPSec Identifier: LANAPCIPSEC
Note: This IPSec name must not be used in any other SA in this VPN network.
• Remote IPSec Identifier: PCIPSEC
• Remote LAN IP Address: 192.168.100.2
Since the remote network is a single PC, and its IP address is unknown, we will
assume it is assigned dynamically. We will choose an arbitrary "fixed virtual" IP
address to define this connection. This IP address will be used in the configuration of
the VPN client. See
• Remote Subnet Mask: 255.255.255.255 since this is a single PC.
• Remote WAN IP Address: 0.0.0.0 since the remote PC has a dynamically assigned IP
address.
5-10
"Configure the VPN Client Identity" on page 5-14.
Virtual Private Networking