Procedure 3-4: Configure Basic Ipsec Wireless Connections - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall

Procedure 3-4: Configure Basic IPSec Wireless Connections

The SafeNet SoftRemote Basic VPN client installer program is on the FVM318 Resource CD.
Observe the following guidelines when using the SafeNet SoftRemote Basic VPN client:
• The SoftRemote Basic client requires Windows 95 or later.
• The SoftRemote Basic client may not be compatible with other VPN clients. In this case
you must uninstall the other client before installing SoftRemote Basic.
• If your PC will also be used for remote VPN connections, you should use the full version
of SafeNet SoftRemote, not the Basic version.
1. Configure the FVM318 settings.
Log in to the FVM318 at
a.
default password of password, or using whatever user name, password you have set up.
Click the Wireless link in the main menu Setup section to display the menu shown below.
b.
Figure 3-13. Wireless Settings menu, IPSec selected
Click the Encryption Strength drop-down list box and select IPSec. The Wireless Settings
c.
menu will change to display the list of IPSec connections, as shown in
Wireless Configuration
http://192.168.0.1 with its default user name of admin and
Figure 3-13:
3-13