NETGEAR FVM318 Reference Manual page 30

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
You are now connected to the firewall. If you do not see the menu above, click the Setup
a.
Wizard link on the upper left of the main menu.
Click Next and follow the steps in the Setup Wizard for inputting the configuration
b.
parameters from your ISP to connect to the Internet.
Note: If you choose not to use the Setup Wizard, you can manually configure your
Internet connection settings by following the procedure
Internet Connection" on page
Unless your ISP assigns your configuration automatically via DHCP, you will need the
configuration parameters from your ISP as you recorded them previously in
Internet Connection Information" on page
When the firewall successfully detects an active Internet service, the Setup Wizard reports
c.
which connection type it discovered, and displays the appropriate configuration menu. If
the Setup Wizard finds no connection, you will be prompted to check the physical
connection between your firewall and the cable or DSL line.
The Setup Wizard will report the type of connection it finds. The options are:
d.
• Connections which require a login using protocols such as PPPoE.
Note: Customers in Austria or Australia who use Internet accounts which require
login will have to use the manual configuration procedure,
Your Internet Connection" on page
options.
• Connections which use dynamic IP address assignment.
• Connections which use fixed IP address assignment.
The procedures for filling in the configuration menu for each type of connection follow
below.
2-8
2-12.
2-3.
2-12. The Smart Wizard will not detect these
"Manually Configuring Your
"Manually Configuring
Connecting the Firewall to the Internet
"Record Your