Encryption Strength Choices; Disable; Ipsec - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
If your wireless adapter requires you to configure an authentication scheme, set it accordingly.
Please refer to "Authentication and WEP Encryption" on page B-13
of these options, as defined by the IEEE 802.11b wireless communication standard.

Encryption Strength Choices

Choose the encryption strength from the drop-down list.

Disable

No encryption will be applied. This setting is useful for troubleshooting your wireless
connection, but leaves your wireless data fully exposed.

IPSec

Selecting IPSec displays the IPSec connection list. Click Add to configure a new IPSec
connection. To edit an existing connection, click the radio button next to the connection on the list,
then click Edit. The IPSec settings screens are shown below.
Figure 3-5: IPSec main or aggressive mode settings
• Choose Aggressive or Main Mode. Aggressive Mode is the default. Aggressive Mode is
required when you use the SafeNet SoftRemote Basic VPN Client for Windows which is
included on the FVM318 Resource CD.
• Select the Encryption Protocol.
Wireless Configuration
IPSec Main and Aggressive Mode Settings
for a full explanation of each
3-5