NETGEAR FVM318 Reference Manual page 52

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
In most cases, you can leave the IPSec Gateway as "LAN Gateway", which indicates the
b.
firewall. If you are not using the firewall as your network's default gateway, change IPSec
Gateway to indicate either the IP Address or the network name of the firewall.
Enter the User Name and the Pre-Shared Key value that you programmed for this PC in
c.
the firewall's IPSec Client Settings menu.
Click OK.
d.
In the taskbar tray, right-click on the SafeNet icon and select Activate Security Policy in
e.
the task menu. The SafeNet icon will now appear without the red bar, as shown below.
Figure 3-18. SafeNet system tray icon showing enabled condition
4. Test the SoftRemote Basic VPN Connection.
To check the VPN Connection, you can initiate a request from the PC to the firewall. The
simplest method is to ping from the PC to the firewall, as shown below:
On the Windows taskbar, click the Start button, and then click Run.
a.
Type
b.
ping -t 192.168.0.1
Figure 3-19. Run Ping from Windows Start Menu
3-16
, and then click OK.
Wireless Configuration