Procedure 3-2: Restrict Wireless Access By Mac Address - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Note: If you are configuring the firewall from a wireless PC and you change the
firewall's SSID, channel, or security settings, you will lose your wireless connection
when you click on Apply. You must then change the wireless settings of your PC to
match the firewall's new settings.
Configure and test your PCs for wireless connectivity.
8.
Program the wireless adapter of your PCs to have the same SSID and channel that you
configured in the router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the firewall.
Once your PCs have basic wireless connectivity to the firewall, then you can configure the
advanced wireless security functions of the firewall.

Procedure 3-2: Restrict Wireless Access by MAC Address

To restrict access based on MAC addresses, follow these steps:
Log in to the FVM318 firewall at its default LAN address of
1.
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
Click the Wireless Settings link in the main menu of the FVM318 firewall.
2.
From the Wireless Settings menu, click the Trusted PCs button to display the Wireless Access
3.
menu shown below.
Figure 3-10. Wireless Access menu
Wireless Configuration
http://192.168.0.1 with its default
3-9