Change The General Settings From The Control Panel - Brother ADS-4300N Online User's Manual

Home > Machine Settings
Settings from the Control Panel

Change the General Settings from the Control Panel

Related Models: ADS-4700W/ADS-4900W
Purpose
Adjust the LCD Backlight Brightness
Change How Long the LCD Backlight
Stays On
Display scan results
Set Sleep Mode Countdown
Set the Machine to Power Off
Automatically
Turn the Auto Start Scan Mode On
> Change Machine Settings from the Control Panel
Operation
Settings > General Setup >
LCD Settings > Backlight
Settings > General Setup >
LCD Settings > Dim Timer
Settings > General Setup >
Notice Settings > Scan
Result(Skip Blank Page)
Settings > General Setup >
Ecology > Sleep Time
Settings > General Setup >
Ecology > Auto Power Off
Settings > General Setup >
Auto Start Scan Mode > On
> Change the General
Description
Adjust the brightness of the LCD
backlight.
Set how long the LCD backlight stays
on.
Set the LCD to display how many
pages are scanned and how many
are skipped.
Set how long the machine must be
idle before it goes into Sleep Mode
(5-90 minutes). The Sleep Mode
setting can reduce power
consumption. When the machine is in
Sleep Mode, it acts as though it is
turned off.
The timer will restart if any operation
is carried out on the machine.
The machine will not enter
Sleep Mode in the following
situations:
• A USB flash drive is
inserted into the machine.
• A machine error has
occurred.
Select how long the machine must
wait before it automatically turns itself
off after entering Sleep Mode. The
Auto Power Off feature can save
power consumption. When this
feature is set to Off, you must power
off the machine manually. To turn the
machine on after the Auto Power Off
feature has turned it Off, press
The timer will restart if you press any
buttons or touchscreen.
Auto Power Off will be
activated when all of these
conditions are met:
• Auto Power Off setting is
not set to Off.
• The machine has been in
Sleep Mode for more than
the preset period.
Scanning starts automatically using
the settings saved as the auto scan
shortcut (Shortcut 57) when you place
.
274