3.
(Wireless Status)
Each icon in the following table shows the wireless network status:
•
Your machine is not connected to the wireless access point/router.
Press this icon to configure wireless settings. For more detailed information, see the Quick Setup
Guide.
•
The wireless setting is disabled.
The wireless network is connected.
A three-level indicator in each of the Home screens displays the current wireless signal strength.
The wireless access point/router cannot be detected.
You can configure wireless settings by pressing the Wireless Status button.
4.
(Admin Settings)
Press to access the [Admin Settings] menu.
NOTE
If required, enter the password you use to manage this machine in Web Based Management, and then
press [OK].
5. Function Icons, Setting Icons and Shortcut Icons
The following descriptions explain basic icons and features. The available features vary depending on your
model.
•
([Settings])
Press to access the Settings menu.
•
([to PC])
Press to access the Scan to PC function.
•
([to Network])
Press to access the Scan to Network function.
•
([to FTP/SFTP])
Press to access the Scan to FTP/SFTP function.
•
([to Workflow])
Press to access the Scan to Workflow function.
Settings must be configured in iPrint&Scan in advance.
•
([to Email Server])
Press to access the Scan to Email Server function.
•
([to SharePoint])
Press to access the Scan to SharePoint function.
•
([to USB])
Press to access the Scan to USB function.
•
([to Web])
Press to connect your machine to an Internet service.
16