Brother ADS-4300N Online User's Manual page 128

Home > Network > Wireless Network Settings
Wireless Network Using the One-Push Method of Wi-Fi Protected Setup
Configure Your Machine for a Wireless Network Using the One-Push
Method of Wi-Fi Protected Setup
Related Models: ADS-4700W/ADS-4900W
If your wireless access point/router supports Wi-Fi Protected Setup
machine's control panel menu to configure your wireless network settings.
1. Press [Settings] > [Network] > [WLAN(Wi-Fi)] > [WPS/Push Button].
2. When [Enable WLAN? Do you want to continue?] appears, press [Yes].
The wireless setup wizard starts. To cancel, press [No].
3. When the touchscreen instructs you to start WPS, press the WPS button on your wireless access point/
router. Press [OK], and then your machine automatically tries to connect to your wireless network.
If your wireless device is connected successfully, the LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
machine, go to your model's Downloads page at support.brother.com.
Related Information
• Use the Wireless Network
> Use the Wireless Network
™
(WPS)
™
(WPS), you can use WPS from your
> Configure Your Machine for a
™
(WPS)
123