Brother ADS-4300N Online User's Manual page 143

Home > Network > Network Features
Using Your Machine's Control Panel
Perform an LDAP Search Using Your Machine's Control Panel
Related Models: ADS-4700W/ADS-4900W
After you configure LDAP settings, you can use the LDAP search feature to find email addresses to use for
scanning to Email Server.
• The LDAP feature supports LDAPv3.
• You may need to use Kerberos Authentication or Simple Authentication to connect to your LDAP server,
depending on the security policy set by your network administrator.
• You must configure the SNTP protocol (network time server), or you must set the date, time and time
zone correctly on the control panel for Kerberos authentication.
1. Press to search.
2. Enter the initial characters for your search using the LCD.
3. Press [OK].
The LDAP search result will be shown on the LCD; the
book search results.
• If there is no match on the server or the email (local) address book, the LCD displays [Results cannot
be found.] for about 60 seconds.
4. Press a or b to display the name you want.
5. Press the name.
To view the details of the name, press [Details].
6. If the result includes more than one email address, the machine will prompt you to select just one. Press
[Apply].
7. Load your document, press [Next], and then press [Start].
Related Information
• Configure and Operate LDAP Search
Related Topics:
• Synchronise Time with the SNTP Server Using Web Based Management
> Configure and Operate LDAP Search > Perform an LDAP Search
icon appears before the email (local) address
138