Advertisement
Regulatory Compliance
Figure 3: Cisco SNS-3515 or 3595 Internal Diagnostic LED Locations
The following table describes the callouts in the above figure.
1
2
3
The following table describes the internal diagnostic LEDs located inside the Cisco SNS-3515 or Cisco
SNS-3595 appliance.
LED Name
Internal diagnostic LEDs (all)
Regulatory Compliance
For regulatory compliance and safety information, see
Cisco SNS-3415, Cisco SNS-3495, Cisco SNS-3515, and Cisco SNS-3595
Install Cisco ISE Software on Cisco SNS Appliances
8
Fan module fault LEDs (one next to each fan
connector on the motherboard)
CPU fault LEDs (one in front of each CPU)
DIMM fault LEDs (one in front of each DIMM
socket on the motherboard)
Install Cisco ISE Software on Cisco SNS Appliances
4
SD card fault LEDs (one next to each bay)
5
RTC battery fault LED
6
mLOM card fault LED (on motherboard next
to mLOM socket)
State
• Off—Component is functioning normally.
• Amber—Component has failed.
Regulatory Compliance and Safety Information for
Appliances.
Advertisement
