Advertisement
Install Cisco ISE Software on Cisco SNS Appliances
Cisco SNS-3515 or 3595 Appliance Front Panel View
The following figure shows the components of the Cisco SNS-3515 or Cisco SNS-3595 appliance front panel
view.
Figure 1: Front Panel LEDs
The following table describes the LEDs located on the front panel of the Cisco SNS-3515 or Cisco SNS-3595
appliance.
Front Panel LEDs
Hard drive fault
1
Drive bays 1-8 support SAS/SATA drives
2
Drive bays 1 and 2 support SAS/SATA
and NVMe PCIe solid state drives (SSDs)
3
Pull-out asset tag
4
Operations panel buttons and LEDs
5
Power button/power status LED
6
Unit identification button/LED
Cisco SNS-3515 or 3595 Appliance Front Panel View
7
System status LED
8
9
Temperature status LED
10
Power supply status LED
11
Network link activity LED
12
KVM connector (used with KVM cable that
provides two USB 2.0, one VGA, and one
• Off—The hard drive is operating properly.
• Amber—Drive fault detected.
• Amber, blinking—The device is rebuilding.
• Amber, blinking with one-second
interval—Drive locate function activated.
Install Cisco ISE Software on Cisco SNS Appliances
Fan status LED
serial connector)
3
Advertisement
