Advertisement
Install ISE 2.0.1 on the Cisco 3500 Appliance Using the USB Drive
Figure 11: Select Boot Device
Step 9
Select the CD/DVD that you mapped and press Enter. The following message is displayed.
Example:
Please wait, preparing to boot........................................................................
...............................................................................................................
The following options appear:
Cisco ISE Installation (Serial Console)
Cisco ISE Installation (Keyboard/Monitor)
System Utilities (Serial Console)
System Utilities (Keyboard/Monitor)
Step 10
At the boot prompt, press Enter to install Cisco ISE using a serial console.
If you want to use a keyboard and monitor, use the arrow key to select the Cisco ISE Installation (Keyboard/Monitor)
option. The following message appears.
**********************************************
Please type 'setup' to configure the appliance
**********************************************
Step 11
At the prompt, type setup to start the Setup program. See
Setup program parameters.
Step 12
After you enter the network configuration parameters in the Setup mode, the appliance automatically reboots, and
returns to the shell prompt mode.
Step 13
Exit from the shell prompt mode. The appliance comes up.
Step 14
Continue with
Install ISE 2.0.1 on the Cisco 3500 Appliance Using the USB Drive
To install ISE on the Cisco SNS 3515 or Cisco SNS 3595 appliance using the USB drive:
Before you begin
You must create a bootable USB drive. See
Step 1
Plug in your bootable USB drive that has the Cisco ISE ISO image in to the USB port.
Step 2
Restart the system through the KVM console and press F6 to go to the Boot Menu.
Install Cisco ISE Software on Cisco SNS Appliances
30
Verify the Installation Process, on page
Install Cisco ISE Software on Cisco SNS Appliances
Run the Setup Program, on page 32
35.
Create a Bootable USB Device to Install Cisco ISE, on page
for details about the
31.
Advertisement
