Advertisement
Run the Setup Program
Prompt
DNS domain name
Primary name server
Add/Edit another name server
Primary NTP server
Add/Edit another NTP server
System Time Zone
Install Cisco ISE Software on Cisco SNS Appliances
34
Description
Cannot be an IP address. Valid
characters include ASCII characters,
any numerals, the hyphen (-), and the
period (.).
Must be a valid IPv4 address for the
primary name server.
Must be a valid IPv4 address for the
primary name server.
Must be a valid IPv4 address or
hostname of a Network Time Protocol
(NTP) server.
Must be a valid NTP domain.
Must be a valid time zone. For
example, for Pacific Standard Time
(PST), the System Time Zone is
PST8PDT (or Coordinated Universal
Time (UTC) minus 8 hours).
Ensure that the system time
Note
and time zone match with
the CIMC or Hypervisor
Host OS time and time zone.
System performance might
be affected if there is any
mismatch between the time
zones.
You can run the show timezones
command from the Cisco ISE CLI for
a complete list of supported time zones.
Note
We recommend that you set
all the Cisco ISE nodes to
the UTC time zone. This
time zone setting ensures
that the reports, logs, and
posture agent log files from
the various nodes in your
deployment are always
synchronized with regard to
the time stamps.
Install Cisco ISE Software on Cisco SNS Appliances
Example
example.com
10.15.20.25
(Optional) Allows you to configure
multiple name servers. To do so,
enter y to continue.
clock.nist.gov
(Optional) Allows you to configure
multiple NTP servers. To do so, enter y
to continue.
UTC (default)
Advertisement
