Advertisement
Install Cisco ISE Software on Cisco SNS Appliances
Install Cisco ISE Software on Cisco SNS Appliances
Install Cisco ISE on the Cisco SNS 3515 or 3595 Appliance
The Cisco SNS 3515 and Cisco SNS 3595 appliances are preinstalled with the ISE software. This section
gives you an overview of the installation process and the tasks that you must perform before installing ISE.
Before you begin installing ISE, you must:
Step 1
Open the box and check the contents. See
Step 2
Read about the
Cisco SNS 3500 Series Appliances, on page
Step 3
Read the general precautions and safety warnings in
Step 4
Install the appliance in the rack. See
Step 5
Connect the Cisco SNS-3515 or Cisco SNS-3595 to the network and appliance console. See
19.
Step 6
Power up the Cisco SNS-3515 or Cisco SNS-3595 appliance. See
Appliance, on page
Step 7
Run the setup command at the CLI prompt to configure the initial settings for the ISE server. See
on page
32. The setup can be done by using the appliance console or CIMC.
You can use the
Cisco SNS-3595 appliance. You can also see the
SNS-3515 or Cisco SNS-3595 appliance.
Download the Cisco ISE ISO Image
Download the ISO image to install Cisco ISE on Cisco SNS appliance.
Step 1
Go to
http://www.cisco.com/go/ise.
Step 2
Click Download Software for this Product
The Cisco ISE software image comes with a 90-day evaluation license already installed, so you can begin testing all
Cisco ISE services when the installation and initial configuration is complete.
Install the ISE Server
After you download the Cisco ISE ISO image, you can use any of the following options to install and set up
the Cisco ISE software on your appliance:
Install Cisco ISE Software on Cisco SNS Appliances
28
Unpack and Inspect the Server, on page
Prepare for Server Installation, on page
22.
Cisco UCS Server Configuration Utility, Release 3.0 User Guide
You must already have valid Cisco.com login credentials to access this link.
Install Cisco ISE Software on Cisco SNS Appliances
1.
Before You Begin, on page
Connect and Power On the Cisco SNS 3515 or 3595
Cisco UCS C-Series Rack Server guides
10.
9.
11.
Connect Cables, on page
Run the Setup Program,
to configure the Cisco SNS-3515 or
for more information on Cisco
Advertisement
